There are threads, rings, polished rods, etc. for the ejector rod of the coil nail. The polished rod is easy to disassemble, the thread is used to fasten the connection of hardwood, and the ring pattern is suitable for the connection of softwood. The surface treatment of coil nails is divided into dipping paint, galvanizing, color zinc plating, Dacromet, etc. Whether the dipping paint is uniform has a great influence on lubrication, fastening, and rust prevention. The nail heads of coil nails are pointed, blunt, chisel pointed, blunt chisel, etc., which are determined according to the hardness and toughness of the material. Most coil nail gun users mistakenly believe that the sharper the nail, the better. This concept is wrong. Any nail has its use occasion, which should be determined according to the specific situation, which has a certain relationship with the nail gun and the material. The matching between the nail gun and the coil nail must be good. When choosing a nail, you must first check whether the nail gun used matches the nail.
The welding wire for coil nails is very important. A good welding wire has just the right hardness and toughness, and the appearance of the solder joints is clean, while a poor welding wire is easy to deform and break during use, causing nail jamming. The welding wire for coil nails is very important. A good welding wire has just the right hardness and toughness, and the appearance of the solder joints is clean, while a poor welding wire is easy to deform and break during use, causing nail jamming.
Post time: 7月-25-2023